(a) What is meant by the statement: The specific heat capacity of copper is \(400 J kg^{-1}K^{-1}\)? (b)(i) Describe an experiment to determine the specific heat capacity of copper using a copper ball. (ii) State two precautions necessary to obtain accurate results (iii) A piece of copper ball of mass 20 g at 200°C is placed in a copper calorimeter of mass 60 g containing 50 g of water at 30°C, ignoring heat losses, calculate the final steady temperature of the mixture (Specific heat capacity of water = \(4.2 J g^{-1}K^{-1}\)) (Specific heat capacity of copper = \(0.4 Jg^{-1}K^{-1}\)).
Explanation
(a) The specific heat capacity of copper is 400 \(JKg^{-1}K^{-1}\) means that 400 J of heat energy is required to raise (or lower) the temperature of 1 kg of a piece of copper by 1 kelvin. (b) Experiment to determine the specific heat capacity of copper using a copper ball. The piece of copper ball is suspended by a thread and placed in a beaker of boiling water. While the temperature of the copper is being raised to boiling point of water, a copper calorimeter is half filled with water. The initial temperature of the water is measured and recorded and the hot copper ball is lifted by the thread and transferred to the calorimeter when the water has reached boiling point. The calorimeter cover is put on, the mixture is well stirred and the final steady temperature read from the themometer. The copper ball is weighed either before or after the experiment. The result is tabulated as shown below. Mass of copper ball - m (kg) Temperature of boiling water - \(\theta\) (K) Mass of copper calorimeter - \(m_{c}\) (kg) Mass of calorimeter + water - \(m_{x}\) (kg) Mass of water \((m_{x} - m_{c})\) - \(m_{w}\) (kg) Specific heat capacity - C \((Jkg^{-1} K^{-1})\) Initial temperature of water = \(\theta_{w}\) (K) Final temperature of water = \(\theta_{f}\) (K) Using Heat lost by copper ball = Heat gained by calorimeter + Heat gained by water \(mc(\theta - \theta_{f}) = m_{c} c (\theta_{f} - \theta_{w}) + m_{w} c_{w} (\theta_{f} - \theta_{w})\) \(c = \frac{m_{w} c_{w} (\theta_{f} - \theta_{w})}{m (\theta - \theta_{f}) - m_{c} (\theta_{f} - \theta_{w})}\) Precautions: (i) The copper ball should be transferred quickly into the calorimeter without splashing. (ii) Just before transfer, the copper should be shaken slightly to remove adhering hot water. (iii) Heat lost by copper ball = heat gained by copper calorimeter + Hoat gained by water. \(m_{c} (\theta - \theta_{f}) = m c (\theta_{f} - \theta_{w}) + m_{w} c_{w} (\theta_{f} - \theta_{w})\) \(20 \times 0.4 \times (200 - \theta_{f}) = 60 \times 0.4 \times (\theta_{f} - 30) + 50 \times 4.2 \times (\theta_{f} - 30)\) \(8(200 - \theta_{f}) = 24(\theta_{f} - 30) + 210 (\theta_{f} - 30)\) \(\theta_{f} = \frac{8620}{242} = 35.6K\)